OldComp.cz

Komunitní diskuzní fórum pro fanoušky historických počítačů


Právě je 28.03.2024, 21:10

Všechny časy jsou v UTC + 1 hodina [ Letní čas ]




Odeslat nové téma Odpovědět na téma  [ Příspěvků: 95 ]  Přejít na stránku Předchozí  1, 2, 3, 4, 5 ... 7  Další
Autor Zpráva
 Předmět příspěvku: Re: Harlequin 128k
PříspěvekNapsal: 07.07.2016, 17:27 
Offline
Pan Generální

Registrován: 19.07.2013, 15:54
Příspěvky: 2723
Has thanked: 144 times
Been thanked: 422 times
Hi Superfo

I'm insteresting about Issue 2B. Do you plan to release this version public? I think gerber data of course.

Will you improve a part list? E.g. item "10n/100V RM5,08" is much better then "10nF".


Nahoru
 Profil  
 
 Předmět příspěvku: Re: Harlequin 128k
PříspěvekNapsal: 07.07.2016, 22:06 
Offline
Prvnička

Registrován: 06.07.2016, 07:59
Příspěvky: 18
Has thanked: 0 time
Been thanked: 16 times
I don't plan to to release Issue 2B gerber file right now because I have about 50 PCBs for sale.
Maybe after I sell out all of them I will release.


Nahoru
 Profil  
 
 Předmět příspěvku: Re: Harlequin 128k
PříspěvekNapsal: 08.07.2016, 10:02 
Offline
Site Admin
Uživatelský avatar

Registrován: 05.04.2013, 15:29
Příspěvky: 2394
Bydliště: Starý Vestec
Has thanked: 426 times
Been thanked: 446 times
superfo píše:
PS: Sorry I don't try to sell any thing here, you can delete it if it violate the rule.


You can sell it here directly to our users. In this case we wil create thread for it in forum "Inzerce".

_________________
Amiga Sinclair Didaktik Sam_Coupé Enterprise SAM440ep μA1 MacBook_Air Mac_Mini_MOS CPC Atari MSX Acorn C64 RetroPC

http://party.oldcomp.cz/


Nahoru
 Profil  
 
 Předmět příspěvku: Re: Harlequin 128k
PříspěvekNapsal: 09.07.2016, 08:43 
Offline
Prvnička

Registrován: 06.07.2016, 07:59
Příspěvky: 18
Has thanked: 0 time
Been thanked: 16 times
VELESOFT píše:
Koukam na schema a mam par poznamek:

- kempston je tam zapojeny bez moznosti vypnout, leda vytahnout obvod U39 z patice. Pripadne by se tam dal pripojit jednoduchy spinac na kabliku a bez zasahu do pocitace vy se elegantnevyresilo vypnuti interniho kempstonu.

- dekodovani portu kempstonu je podle stareho vzoru, dekoduje jen jednu adresu A5, coz je malo a muze dochazet ke kolizim s externima periferiema. Konkretne nepujde pripojit zadna K-MOUSE. Leda by se zuplnila adresace portu o A6=1 a idealne i A7=1.

- kempston port zde posila jen data D0-D5, takze na hornich bitech byvaji nestabilni data. Je zde zapojene jen jedno tlacitko fire, druhe by slo zapojit na nevyuzity bit D5, ale misto toho tam nekdo frknul +5V. Skoda, nestalo by to nic a hned by tam slo pouzit dve fire kdyz si pripojite gamepad ze sega genesis.

- dekoder portu 7FFD (strankovani rozsirene pameti 128kB) i AY portu ma uplnejsi adresaci o A12=1. Dekodovani je jine nez u originalnich ZX Specter 128/+2/+2A/+3. To zpusobuje urcitou nekompatibilitu pri pouziti LD A,xx + OUT (253),A.

- konektor sbernice ma kolem pinu rozlitou nepajivou masku, to by nemelo byt. Spravne ma byt prostor mezi pinama cisty a bez masky ci potisku. Preci jen se tam zasouvaji periferie a maska se pak casem muze vydrolit, nebo zaspini kontakty konektoru.

Dal uz jsem to nezkoumal...


Joystick interface is an option, I add it because there is an empty space, I try to add DivMMC but have not succeed yet.

For AY address decoder, it is my fault, you can fix it by disconnect A12 from pin 6 of U4, then connect pin 6 of U4 to VCC. And disconnect pin 9 of U51C from pin 9 of U4, then connect it to pin 7 of U4. (issue 1B has this fix already).


Nahoru
 Profil  
 
 Předmět příspěvku: Re: Harlequin 128k
PříspěvekNapsal: 09.07.2016, 10:33 
Offline
Prvnička

Registrován: 06.07.2016, 07:59
Příspěvky: 18
Has thanked: 0 time
Been thanked: 16 times
suksoft píše:
Superfo why you don't use HCT and you use HC chips?


Someone try using HCT and have some timing problem but in theory it should work.


Nahoru
 Profil  
 
 Předmět příspěvku: Re: Harlequin 128k
PříspěvekNapsal: 09.07.2016, 10:39 
Offline
Prvnička

Registrován: 06.07.2016, 07:59
Příspěvky: 18
Has thanked: 0 time
Been thanked: 16 times
http://www.pdf-archive.com/2016/07/09/h ... -issue-1b/

http://www.pdf-archive.com/2016/07/09/h ... 8-issue-2/

http://www.pdf-archive.com/2016/07/09/h ... -issue-2b/


Nahoru
 Profil  
 
 Předmět příspěvku: Re: Harlequin 128k
PříspěvekNapsal: 09.07.2016, 15:29 
Offline
Pan Štábní

Registrován: 29.06.2013, 16:52
Příspěvky: 1611
Has thanked: 31 times
Been thanked: 357 times
computerasylum píše:
K čemu je U47 ?


U47 je jen 8 odporu v dil pouzdru. Lze nahradit pomoci odmi beznych odporu. Slouzi k oddeleni datove sbernice videoram a datove sbernice CPU/fast ram/rom/zx bus. Je to stejne jako u original ZX Specter.

_________________
http://velesoft.speccy.cz/


Nahoru
 Profil  
 
 Předmět příspěvku: Re: Harlequin 128k
PříspěvekNapsal: 09.07.2016, 19:37 
Offline
Prvnička

Registrován: 06.07.2016, 07:59
Příspěvky: 18
Has thanked: 0 time
Been thanked: 16 times
suksoft píše:
Thank you for a scheme for 2B. If you will have a little free time, please improve legibility, e.g. U45B is not readable very well.

Do you plan to make some file how improve 2B? I think give signal RD to BDIR a BC1. Or A12 to U4/16.


We don't need A12 for U4 anymore, in 2B, pin 6 of U4 is connected to pin 16 (VCC) already.
Also we don't need RD to control BDIR or BC1 because we use WR instead.


Nahoru
 Profil  
 
 Předmět příspěvku: Re: Harlequin 128k
PříspěvekNapsal: 09.07.2016, 19:53 
Offline
Pan Štábní

Registrován: 29.06.2013, 16:52
Příspěvky: 1611
Has thanked: 31 times
Been thanked: 357 times
Good idea is also use jumpers for possibility disable internal AY and kempston joy ports. This enable full compatibility with external devices with own kempston joystick ports (MB02+, D40/D80, INTERFACE UR-4, DIVMMC, RTC MODULE....) or other kempston devices as KEMPSTON MOUSE, all K-MOUSE version. Also will possible without collisions connect external TURBOSOUND or TURBOSOUND FM or SAAY interfaces. With internal kempston is impossible connect also external BETA-DISK interface and not work kempston and mouse on Interface 1 bis. External ZX devices not use IORQGE pin on ZX bus...

_________________
http://velesoft.speccy.cz/


Nahoru
 Profil  
 
 Předmět příspěvku: Re: Harlequin 128k
PříspěvekNapsal: 09.07.2016, 23:46 
Offline
Prvnička

Registrován: 06.07.2016, 07:59
Příspěvky: 18
Has thanked: 0 time
Been thanked: 16 times
http://www.pdf-archive.com/2016/07/09/h ... 8-issue-1/


Nahoru
 Profil  
 
 Předmět příspěvku: Re: Harlequin 128k
PříspěvekNapsal: 10.07.2016, 00:31 
Offline
Prvnička

Registrován: 06.07.2016, 07:59
Příspěvky: 18
Has thanked: 0 time
Been thanked: 16 times
suksoft píše:
How you could solve problem when PC is 11xx xxxx xxxx xx0x and CPU have Interrupt Request/Acknowledge Cycle? You have collision on the bus.

I am not sure what is the problem, AY will not active if IORQ = 1.
what happen when CPU have an interrupt?


Nahoru
 Profil  
 
 Předmět příspěvku: Re: Harlequin 128k
PříspěvekNapsal: 10.07.2016, 01:34 
Offline
Pan Štábní

Registrován: 29.06.2013, 16:52
Příspěvky: 1611
Has thanked: 31 times
Been thanked: 357 times
If is interrupt vector different than stable value #FF (thanks to pull-up resistors on data bus) then some russian software and games with k-mouse support will crash.

_________________
http://velesoft.speccy.cz/


Nahoru
 Profil  
 
 Předmět příspěvku: Re: Harlequin 128k
PříspěvekNapsal: 10.07.2016, 10:20 
Offline
Pan Generální

Registrován: 19.07.2013, 15:54
Příspěvky: 2723
Has thanked: 144 times
Been thanked: 422 times
superfo píše:
suksoft píše:
When CPU "ask" device for an interupt vector - IORQ is in log0 and M1 is in log0 too. If A15=1 and A14=1 and A1=0 then BC1 go to log1 and the same time is BDIR in log0 so AY will give data to data bus (read from PGS). The same time device which envoke interupt give data on bus too. So you have collision on the bus.

Solution could be give the signal M1/ to U4/6.


From the picture, it looks like RD is 1 that means WR = 0. If WR = 0 it means select register in PGS, not sure it will create the problem.

Anyway if you have a chance please try the signal M1, I can make a change in next rev.


When "Acknowledge Cycle" is active. Both WR an RD is in log1 state! U4 not correctly think that it is reading AY but this is a mistake.


Nahoru
 Profil  
 
 Předmět příspěvku: Re: Harlequin 128k
PříspěvekNapsal: 08.09.2016, 14:45 
Offline
Pan Generální

Registrován: 19.07.2013, 15:54
Příspěvky: 2723
Has thanked: 144 times
Been thanked: 422 times
Kubik píše:
Ktere to jsou konektory? Ja je kupoval relativne draze z UK...


tyto:
CONNFLY DS1020-05ST1D
CONNFLY DS1020-08ST1D


Nahoru
 Profil  
 
 Předmět příspěvku: Re: Harlequin 128k
PříspěvekNapsal: 08.09.2016, 21:15 
Offline
Óm Nejvyšší

Registrován: 16.06.2014, 12:23
Příspěvky: 3676
Bydliště: Jesenice u Prahy
Has thanked: 28 times
Been thanked: 280 times
http://www.tme.eu/cz/details/ds1020-05s ... m/connfly/
http://www.tme.eu/cz/details/ds1020-08s ... m/connfly/

_________________
Diagnóza: Touretteův syndrom, Koprolálie, Dyslexie, Obsedantně kompulzivní porucha.
Kalkulačky: Privileg PR56, TI51-III, TI57, TI58, TI59, TI83, TI-83 Premium CE, TI89
Počítadla: BOBO64, ZX48 plus, DG-88, Didaktik-M, C16, C64C, Amiga 500+, MZ800, MUPID C2A2


Nahoru
 Profil  
 
Zobrazit příspěvky za předchozí:  Seřadit podle  
Odeslat nové téma Odpovědět na téma  [ Příspěvků: 95 ]  Přejít na stránku Předchozí  1, 2, 3, 4, 5 ... 7  Další

Všechny časy jsou v UTC + 1 hodina [ Letní čas ]


Kdo je online

Uživatelé procházející toto fórum: Žádní registrovaní uživatelé a 7 návštevníků


Nemůžete zakládat nová témata v tomto fóru
Nemůžete odpovídat v tomto fóru
Nemůžete upravovat své příspěvky v tomto fóru
Nemůžete mazat své příspěvky v tomto fóru
Nemůžete přikládat soubory v tomto fóru

Hledat:
Přejít na:  
Založeno na phpBB® Forum Software © phpBB Group
Český překlad – phpBB.cz